You may run out of options when you don’t know how to install tin roof materials on a shed.
Metal roofing is usually the most viable option since it’s typically easy to install. Also, metal is relatively cost-effective compared to other roofing materials, like shingles.
Roofing Guide for Installing Tin Roof on a Shed
Sheds are helpful when you want space to store tools and equipment. It would be best to have a shed when you have items like chemicals that you can’t stay with indoors due to their hazardous nature. Your priority is to get a competent roof on your outdoor shed.
A tin roof tin has a long lifespan despite withstanding changing weather conditions. It adds a rustic feel to your shed, so you don’t have to look for exciting designs for sheds.
Continue reading if you’d like to learn how to install tin roof materials onto your backyard shed with ease.
9 Tips on How to Install a Tin Roof on a Shed
Tin roofing belongs in the corrugated category of metal roofing. Corrugation is the deeps and swells which come in different widths and shapes. Manufacturers use these designs to ensure the roofs can withstand severe weather conditions like snowstorms.
Here are tips on how to install tin roof on shed spaces:
Ensure your safety
It’s essential to have all the equipment you require to ensure your safety and comfort throughout the roofing process. Heavy gloves and goggles should always be at the top of the list of safety equipment. Also, a fall–restraint harness is necessary, depending on your shed’s size.
Flexible rubber shoes will also be helpful to ensure you have a grip when stepping on the tin metal roofing. The best time to schedule tin roof installation is when the weather is dry. Wet surfaces are slick. Also, wind could make the panels airborne, which is risky.
Measure the Length and the Width of Your Roof
If your shed has a peak, measure the width on both sides. After measuring, you can cut the roofing felt and then lay it horizontally along the plywood in the roof’s deck.
Since the tin roof will lie vertically, the horizontal alignments create a seam that enhances the waterproof qualities of the roof.
Ensure that you use roofing staples in a staple gun to attach the felt. A hammer and nails would be just as effective, but they require more effort. Each layer should overlap by 4 inches.
Add an Overhang with the Tin Panels
The third and most essential step when working out how to install a tin roof is adding an overhang with the tin panels of at least 4 inches on each side of the roof measurement. Consider ensuring that the overhang is larger on the side where the door stands. This part deflects rainwater.
Lay the First Piece of Tin Roofing Panel
Proceed to lay the first tin panel at the bottom corner of the roof while positioning it to overlap the edge by four inches. Next, place a washer into a wood screw with 1 ½ inch and choose a narrow corrugated part to drive it through the plywood.
Ensure that you tighten it to secure the panel firmly without creating dents. Drive-in screws every eight inches along the outside edge and bottom of the panels. Don’t forget to overlap the panels for proper placement.
Lay Another Panel Beside the First Piece
Next, place another tin roofing panel beside the first piece along the bottom edge of the roof. Go ahead and overlap the first panel with the rounded corrugation. You can screw the overlapping edges and bottom of this second panel.
Continue Adding Panels Along the First Row
The first row leads you on how to add more pieces. Cut the last panel for it to be first on the edge. You will need a jigsaw with a cutting blade suitable for cutting metal to see this through.
Ensure that you secure the last panel’s side and bottom on the first row while leaving overlaps at the side edge at four inches.
Start the Second Row
You can install the second row of panels when done with the first. Start by laying a whole piece of the tin panel on a cut piece to alternate the seams and enhance the roof’s waterproof abilities.
It’s also essential to overlap this second row below by 4 inches. When driving screws, they should go through the outside and bottom of the piece so that the bottom row attaches to the overlapped area of the first row. Doing this will secure both pieces of tin roofing simultaneously.
Finish Installations
You are about to finish your tin roof installation by the time you get to this step. Target the bottom first and build up to the top for a peaked roof. While at the top, add a folded peak piece of tin shape to fit the top of the roof.
Position the peak piece on top of the roof to overlap the row of tin panels below it. You will need a washer screw to secure it firmly once done.
Seal the Seams and Coat the Roof
The final step in installing a tin roof on a shed is about putting in the final finishes to guarantee the functionality of that roof. Use roofing caulking to seal the seams of the room. Caulk is fast drying and only takes a few hours.
Once it dries, you can paint the roof with coat sealer — you can use a large paintbrush or a paint sprayer to do this.
Bottom Line
You don’t have to worry about maintenance for a while once you install a tin roof properly. It’s essential to have all the materials necessary for the installation. Although it’s a shed, it’s vital to check that on local building codes to ensure you are on the right side of the law. Follow all these steps to install a tin roof, and you will not regret it.
If you don’t have the time or simply aren’t comfortable installing a tin roof on your shed, you can reach out to a professional roofing company, like our team at Roof Master.
